Those "security-level" commands that you issued for the interface took care of that. On your first point, the firewall portion is already setup. No threat-detection statistics tcp-intercept Snmp-server enable traps snmp authentication linkup linkdown coldstartĬrypto ipsec security-association lifetime seconds 28800Ĭrypto ipsec security-association lifetime kilobytes 4608000ĭhcpd address 192.168.2.2-192.168.2.33 insideĭhcpd auto_config outside interface insideĭhcpd dns 192.168.1.120 interface outside Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absoluteĭynamic-access-policy-record DfltAccessPolicy
Icmp unreachable rate-limit 1 burst-size 1 Result of the command: "show running-config" : Saved So the outside interface just goes to the office network. Right now it is just setup on my work machine for some testing. I could also RDP to the DC on the inside interface then connect if that was more secure. Setup access to the appliance from our main office and my offsite lab. Are there any other configs I should be aware of to secure the actually firewall or does it come setup pretty well out of the box? I feel if I saw one example like for port 80 I could replicate that. We also need RDP opened to both machines we use a non-standard port. The other is the DC so all standard ports for that need to be opened up. There will be two servers attached to the inside interface: one is a web server so ports 80, 25, etc. I need some step by step for the following tasks
I know how to get it functioning with an inside and outside interface so that's great! I am looking for some straight forward step by step instructions to complete the following tasks. I have looked through a lot of these posts on the Cisco ASA5505 as well as gone online.
0 kommentar(er)
